NEC NEAX 2000 IVS, Command Manual

Page: 141 / 473

CHAPTER 3 ND-45669 (E)
Page 116
Revision 2.0
CM17
COMMAND CODE
TITLE:
UCD GROUP
17
MAT
4. DATA TABLE:
Note 1: Station numbers should be individually assigned to an ACD / UCD Group, as shown below.
STATION No. (A) STATION No. (B)
1st operation STN 1 STN 2
2nd operation STN 2 STN 3
Last operation STN n STN 1
(STN 1–STN n: Station Numbers included in an ACD / UCD Group)
Note 2: After data setting, lift the handset once, to activate the ACD / UCD function, at each ACD / UCD station.
1. FUNCTION:
This command is used to define ACD (Automatic Call Distribution) / UCD (Uniform Call Distribution)
groups.
2. PRECAUTION:
(1) A maximum of 16 ACD / UCD groups can be assigned per system.
(2) A maximum of 60 stations can be assigned to an ACD / UCD group.
(3) Prior to changing or deleting the station number within an ACD / UCD Group, in Y=0, it is neces-
sary to change the data for Y=1–7 to the initial data.
(4) This command is included in MAT mode menu “A5” (UCD Group [COM01]).
3. ASSIGNMENT PROCEDURE:
:
Initial Data
Y STATION NUMBER (A) SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
0 Assignment of the sta-
tion numbers to be in-
cluded in the ACD/
UCD Group (Refer to
Note 1 and Note 2 )
X
XXXX
Station Number (A) X
XXXX
Station Number (B)
ST + 17Y + DE + + DE + + EXE
STATION NUMBER (A)
(1-4 digits)
DATA
(1-4 digits)
~ ~
. . .
.
.
.
. . .
[CM17] UCD Group