Upgrading Your Server 9-49
The memory LockStep feature can be used under the following conditions:
Install two DIMMs that operate in parallel in memory socket.
All the installed DIMMs should have the same capacity.
Run SETUP (see Chapter 4), change parameters appropriately in the menu selected as
shown below, save the settings and exit from SETUP.
Select [Advanced]
→
[Memory Configuration]
→
[Memory RAS Mode]
→
[Lock Step].
After SETUP finishes, rerun SETUP and make sure that the installed DIMM status is
[Lock Step].
Install memory devices in the following order:
The following memory LockStep cannot be configured:
Memory LockStep between memory channels of different memory controllers (CPU)
Memory LockStep within the same memory channel
Notes on configuring memory LockStep
In memory LockStep configuration, [Memory RAS Mode] menu is changed from "LockStep" to
"Independent" in the following cases:
When you additionally install DIMMs that unable to configure memory LockStep
When you remove DIMMs that takes down the memory LockStep
1-CPU
configuration
3rd
6th
2nd
5th
1st
4th
REAR
FRONT
2-CPU
configuration
5th
11th
3rd
9th
1st
7th
8th
2nd
10th
4th
12th
6th
Summary of Contents for N8100-1668F
