![background image](http://html.mh-extra.com/html/nec/n8100-1668f/n8100-1668f_user-manual_251356307.webp)
Troubleshooting 8-25
Error Messages on Virtual LCD
NEC EXPRESSSCOPE Engine 2 (Remote Management Controller) on your server board allows
you to monitor the server status on the Web browser.
Messages displayed on upper line (BIOS message)
On-screen message Description
Action
XX BIOS Rev XXXX
POST in progress.
Wait until POST completes.
Prepare To Boot
POST completes normally.
Wait until Boot completes.
Mem Reconfigured
POST completes with memory degraded. Contact your service
representative.
Mem Err Disable
A correctable memory error frequently
occurred.
CPU Reconfigured
POST completes with processor
degraded.
Memory C-Err XX
A correctable error frequently occurred.
Memory U-Err XX
An uncorrectable error has occurred.
PCI Bus SERR XX
A SERR has occurred in the PCI bus XX.
PCI Bus PERR XX
A PERR has occurred in the PCI bus XX.
Chipset Err XXXX
A chipset error occurred.
Messages displayed on lower line (BMC message)
On-screen message Description
Action
Proc 1 VccpAlm
Voltage alarm occurred
XX=09: high voltage (alarm)
XX=02: low voltage (alarm)
XX=07: high voltage (warning)
XX=00: low voltage (warning)
Contact your service
representative.
Proc 2 VccpAlm
BB P_Vtt Alm XX
BB +1.5v Alm XX
BB +1.8v Alm XX
BB +1.9vs Alm XX
BB +3.3v Alm XX
BB +3.3vs Alm XX
BB +5.0v Alm XX
BB +5vs Alm XX
BB +12v Alm XX
VBAT Alm XX
Summary of Contents for N8100-1668F
