![background image](http://html.mh-extra.com/html/nec/n8100-1668f/n8100-1668f_user-manual_251356295.webp)
Troubleshooting 8-13
Displayed Error Message
Description
Recommended Action
8001
Real time clock error
Real-time clock error
Start up the BIOS setup
utility, and then specify the
correct date and time. If the
same error continues to
occur, contact your service
representative.
8002
Check date and time
settings
The real-time clock time
setting is incorrect.
8003
System battery is dead -
Replace and run SETUP
There is no system battery.
Contact your service
representative to request
battery replacement. (After
the replacement, start up the
BIOS setup utility, and then
specify the correct settings.)
8005
Previous boot incomplete
- Default configuration
used
The last time the system was
started up, POST processing
did not finish.
Use the BIOS setup utility to
specify the correct settings.
8006
System configuration
data cleared by Jumper.
The BIOS setup utility
settings were cleared using
the jumper.
Specify the BIOS setup utility
settings again.
8007
SETUP Menu Password
cleared by Jumper.
The BIOS setup utility menu
password was cleared using
the jumper.
Use the BIOS setup utility to
specify another password.
8010
Graphics controller was
not detected.
No graphics controller was
detected.
Contact your service
representative.
8800
DXE_NB_ERROR
An error was detected during
chip set initialization.
8801
DXE_NO_CON_IN
An error was detected during
console initialization.
8802
DXE_NO_CON_OUT
8803
PEI_DXE_CORE_NOT_
FOUND
A Flash ROM failure was
detected.
8804
PEI_DXEIPL_NOT_FOU
ND
8805
DXE_ARCH_PROTOCO
L_NOT_AVAILABLE
8806
PEI_RESET_NOT_
AVAILABLE
The system was not reset
correctly.
8807
DXE_RESET_NOT_
AVAILABLE
Summary of Contents for N8100-1668F
