5-88 Installing the Operating System with Express Setup
When the system is Windows Server 2008 R2
Follow the procedure below to specify.
1.
Click Start and select [Control Panel].
The [Control Panel] window appears.
2.
Click [System and Security] and then select [System].
NOTE:
If [View by] is not set as [Category], start [System] from
Control Panel directly.
3.
Click [Advanced system settings].
The [System Properties] dialog box appears.
4.
Select [Advanced] tab.
5.
Click [Settings] on the [Startup and Recovery] group box.
6.
Modify [Dump file] in the [Write debugging information] group box, and click [OK].
e.g. Write the debug information in D drive with the file name
"MEMORY.DMP".
D:\MEMORY.DMP
IMPORTANT:
To specify "Complete Memory Dump" to write the debug
information is recommended. If the mounted memory size is larger
than 2GB, "Complete Memory Dump" cannot be specified so that
specify "Kernel Memory Dump" instead.
Specify the drive where there is a free area more than the size of
"the memory capacity mounted on Express 300MB".
In case the mounted memory size exceeds 2GB due to the added
memory, change the write debugging information to [Kernel
Memory Dump] before adding memory.
The size of debugging information (memory dump) to be taken also
changes due to adding memory. Verify the size of the empty space
in the debugging information (memory dump) write destination
drive.
Summary of Contents for N8100-1668F
