![background image](http://html.mh-extra.com/html/nec/n8100-1668f/n8100-1668f_user-manual_251356343.webp)
Troubleshooting 8-61
IMPORTANT:
Do not change the boot device order in BOOT menu in BIOS
SETUP. NEC EXPRESSBUILDER cannot be used if the DVD
drive is not the first device to launch the system.
Connect the LAN cable to the connector on management LAN port.
Or, connect the LAN cable to LAN connector 1 if Shared BMC
LAN feature is used.
Use the serial port B for direct connection.
To use this feature, you need to create a configuration file (3.5-inch
floppy disk) that includes communication method between the
server and the management PC, and various setup parameters.
Use NEC ESMPRO BMC Configuration or NEC ESMPRO Agent
Extension or run "System Management" menu from NEC
EXPRESSBUILDER to create a configuration file.
Save the configuration file into the root directory of the floppy disk
as the following file name.
– File name: CSL_LESS.cfg
If you exit the BIOS SETUP by unusual way (e.g., forced power-off
or reset), the redirection process may fail. In such a case, setup
again by using the configuration file.
On Windows Server 2008, you need to open Device Manager,
disable the COM port, and restart the system to use the direct
connection through COM port.
NOTE:
The following items of BIOS setup information will be set as
shown below.
LAN Controller:
[Enabled]
Serial Port A:
[Enabled]
Base I/O Address:
[3F8]
Interrupt:
[IRQ 4]
Serial Port B:
[Enabled]
Base I/O Address:
[2F8]
Interrupt:
[IRQ 3]
BIOS Redirection Port: [Serial Port B]
Baud Rate:
[19.2K]
Flow Control:
[CTS/RTS]
Console Type:
[PC ANSI]
Summary of Contents for N8100-1668F
