NEC Express5800/120Rj-2, User Manual

Page: 284 / 418

9-8 Upgrading Your Server
HARD DISK DRIVE
Your server is equipped with hard disk drive bay that can contain hard disk drive of 25.4-mm (1-
inch) high. You may purchase the hard disk drive with dedicated drive carrier.
IMPORTANT:
„
Do not use any hard disk drives that are not authorized by NEC.
Installing a third-party hard disk drive may cause a failure of the
server as well as the hard disk drive. Purchase hard disk drives of
the following models:
– N8150-247 (250GB, 7,200 rpm, SATA2/300)
– N8150-229 (500GB, 7,200 rpm, SATA2/300)
– N8150-237 (750GB, 7,200 rpm, SATA2/300)
– N8150-199 (36.3 GB, 15,000 rpm, SAS)
– N8150-200 (73.2 GB, 15,000 rpm, SAS)
– N8150-201 (146 GB, 15,000 rpm, SAS)
– N8150-226 (300 GB, 15,000 rpm, SAS)
NOTE: SAS and SATA2 hard disk drives cannot co-exist.
„
The Internal RAID Controller (equivalent to N8103-116) supports
RAID levels 0, 1, 5, and 6.
To use RAID 5 or RAID 6, you need to additionally install the
optional N8103-119 RAID Upgrade Kit.
The hard disk drive bay may contain up to six hard disk drives. The port numbers are factory-
assigned to hard disk drives as shown below.
0
1
2
3
4
5
Port 0
Port 1
Port 5
Port 4
Port 3
Port 2