NEC Express5800/120Rj-2, User Manual

Page: 121 / 418

Configuring Your Server 4-31
Reconstruction
The reconstruction feature is used to change configuration and/or RAID level of existing virtual
disk. The Reconstruction contains the following three features, however, the Internal RAID
Controller (equivalent to N8103-116) supports "Migration with addition" only.
IMPORTANT:
You can use WebBIOS for Reconstruction. Universal
RAID Utility does not support Reconstruction.
Removed physical drive
Unsupported.
Migration only
Unsupported.
Migration with addition
Use this feature to add HDDs to existing virtual disk. The execution patterns are as shown below (
α
:
Number of HDDs to be added).
Before execution After execution
RAID
level Number of
HDDs RAID
level Number of
HDDs
Description
RAID0 x RAID0 x+
α
Capacity increased: equivalent to
α
HDDs
RAID0 1 RAID1 2 Capacity remains unchanged.
RAID0 x RAID5
x+
α
Capacity increased: equivalent to
α
-1 HDDs
RAID0 x RAID6
x+
α
(
α
=2 or more)
Capacity increased: equivalent to
α
-2 HDDs
RAID1 2 RAID0
2+
α
Capacity increased: equivalent to
α
+1 HDDs
RAID1 2 RAID5 2+
α
Capacity increased: equivalent to
α
HDDs
RAID1 2 RAID6
2+
α
Capacity increased: equivalent to
α
-1 HDDs
RAID5 x RAID0
x+
α
Capacity increased: equivalent to
α
+1 HDDs
RAID5 x RAID5 x+
α
Capacity increased: equivalent to
α
HDDs
RAID5 x RAID6
x+
α
Capacity increased: equivalent to
α
-1 HDDs
RAID6 x RAID0 x+
α
Capacity increased: equivalent to
α
+2 HDDs
RAID6 x RAID5
x+
α
Capacity increased: equivalent to
α
+1 HDDs
RAID6 x RAID6 x+
α
Capacity increased: equivalent to
α
HDDs