Muratec FAX SCANNER, Installation Manual

Page: 75 / 187

Advanced fax
If an EasyDial call fails
If an EasyDial call fails, what happens next depends upon the kind of call it was.
If it was a fax call …
… Your fax machine automatically redials the number according to the redial inter-
val you’ve set (see page 3.75). It keeps trying until either of the following occurs:
• It successfully reaches the other number
• It has attempted the number of redials programmed and has still not connected
(see “Changing redial settings,” page 3.75).
If it was a regular phone call …
… You’ll have to redial manually:
1
Obtain a dial tone by either lifting the handset or pressing
MONITOR
/
CALL
.
2
Press [Redial].
Note: If the call fails and you used
MONITOR
/
CALL
to dial, press
MONITOR
/
CALL
to
hang up. Or if you’ve pressed
START
to begin the transmission, press
STOP
to
end it.
3.23
F
ax F
eatures
Getting Started