Muratec FAX SCANNER, Installation Manual, Page: 48 / 187

Copy settings
02. Width of the separator line
Default setting: 0.01 inch
You can change the width of the separator line in the Combine and Repeat function.
The default setting is 0.01 inch, but you can change it to within 0.01 – 0.05 inch in
0.01 inch steps.
1
Press
MENU
, [Copy Set].
2
Select “E. User Settings” and then press [Enter].
3
Select “02. Separator Line Width” and then press [Enter].
4
Enter the width of the separator line you want
to set to default.
5
Press [Enter] to save the setting.
6
Press
RESET
to return to standby.
03. Auto reset mode
Default setting: Auto reset time: 3 minutes, Reset after scan: OFF
The machine returns to its initial condition automatically after a certain period of
time. You can change this time from 1 to 10 minutes. Also, you can set the machine
to return to its initial condition soon after finishing to scan.
Note: The machine first resets the
LCD
display, and after certain period of time it
resets the key settings to the initial condition.
1
Press
MENU
, [Copy Set].
2
Select “E. User Settings” and then press [Enter].
3
Select “03. Copy Panel Reset” and then press [Enter].
4
Select “Auto reset time” and then press
[Enter].
5
Enter the time for auto resetting, and then
press [Enter] to save the setting.
6
Select “Reset after scan” and then press
[Enter].
7
Select “ON” or “OFF” then press [Enter] to
save the setting.
8
Press [Exit] to finish.
Press
RESET
to return to standby.
04. Last Job Hold Time
Default setting: 0 minute
Your machine can hold the last scanned data of copying for a certain period. You can
change that time here.
Note: If it is 0 minute, the Last Job feature will not work.
1
Press
MENU
, [Copy Set].
2
Select “E. User Settings” and then press [Enter].
3
Select “04. Last Job Hold Time” and then
press [Enter].
4
Enter the time for holding the scanned data for
the Last Job feature.
5
Press [Enter] to save the setting.
6
Press
RESET
to return to standby.
Last Job Hold Time
Enter the hold time.
0 min. (000‑600)
Enter
User Settings
Use cursor to select
item.
01.Copy Scan Setting
02.Separator Line Width
03.Copy Panel Reset
04.Last Job Hold Time
Enter
05.Image Compress Mode
Copy Panel Reset
Use cursor to select
ON or OFF.
OFF
Enter
ON
Set auto reset time.
Copy Panel Reset
Auto reset time : 3min.
Exit Enter
After 3 min. (1‑10)
Reset after scan : OFF
Separator Line Width
Set width of line.
0.01" (0.01‑0.05)
Line width :0.01"
Enter
2.28