Muratec FAX SCANNER, Installation Manual

Page: 13 / 187

11
Installation
14
The
LCD
now asks you to enter the name you
want to appear at the top of faxes you send.
The name may be up to 22 characters in
length.
Select TTI 1, 2 or 3 using the cursor key. Then
press [Enter].
15
Use the one-touch keys to enter letters and other non-numeric characters. To
enter characters, see page 1.15 in the operating instructions.
Note: If you make a mistake, press [Clear] to erase to the left.
To change just one character in the name, move the cursor by cursor
key. Press [Clear] to erase the character. Then re-enter the character
correctly.
16
Press [Enter] to save the setting.
If you do want to set or change another TTI, go back to step 14.
If you do not want to set or change any other TTI, press [Exit].
17
The
LCD
now asks you to set the usual TTI.
Select the TTI you want to appear usually on
faxes you send using the or cursor key.
18
Press [Enter] to save the setting and continue.
19
The
LCD
now asks you to set the reception
mode.
20
Select the desired reception mode using the
cursor key.
21
Press [Enter] to save the setting. Your
machine will return to standby mode.
I.User Install
▲ ▼ Enter
Select reception mode
Fax Ready
Tel/Fax Ready
Fax/Tel Ready
by cursor key.
Ans/Fax Ready
Tel Ready
I.User Install
▲ ▼ Enter
Select usual TTI
1:Head Office
2:General department
3:Account department
by cursor key.
I.User Install
Chara. Clear Enter
TTI 1 Upper case
TTI 1 :
TTI 2 :
TTI 3 :
̲