1.2 C&I and O&G, application 1600 – Intended use
Correct use
The product is intended for use in accordance with its contractually-defined purpose as described in the rele-
vant technical documents only.
Intended use entails operation:
• Within the permissible operating parameters in accordance with the (→ Technical data)
• The Assembly Instructions must be available and be observed
• With fluids and lubricants approved by the manufacturer in accordance with the (→ Fluids and Lubricants
Specifications of the manufacturer)
• With preservation approved by the manufacturer in accordance with the (→ Preservation and Represerva-
tion Specifications of the manufacturer)
• With spare parts approved by the manufacturer in accordance with the (→ Spare Parts Catalog/MTU con-
tact/Service partner)
• In the original as-delivered configuration or in a configuration approved by the manufacturer in writing (al-
so applies to engine control/parameters)
• In compliance with all safety regulations and in adherence with all warning notices in this manual
• In compliance with the maintenance work and intervals specified in the (→ Maintenance Schedule)
throughout the useful life of the product
• In compliance with the maintenance and repair instructions contained in this manual, in particular with
regard to the specified tightening torques
• With the exclusive use of technical personnel trained in commissioning, operation, maintenance and re-
pair
The engine is not designed for operation in a potentially explosive atmosphere.
• The engine or electronic engine management system can produce electric sparks, which can ignite com-
bustible gases in the surrounding area.
• There is also a risk of the engine drawing in combustible gases, thus resulting in uncontrolled operation.
Neither can the possibility of components being ejected suddenly from the engine be excluded.
• The engine can generate sparks or flames in the exhaust system that can ignite combustible gases in the
surrounding area.
It is the responsibility of the operating company to install and operate the engine a safe distance from a dan-
ger source. Any existing safety regulations or recommendations must be observed.
Any other use, particularly misuse, is considered as being contrary to the intended purpose. Such improper
use increases the risk of injury and damage when working with the product. The manufacturer shall not be
held liable for any damage resulting from improper, non-intended use.
The specifications of the manufacturer will be amended or supplemented as necessary. Prior to operation,
make sure that the latest version is used. The latest version can be found on the websites:
• For drive systems: http://www.mtu-online.com
• For power generation: http://www.mtuonsiteenergy.com
The engine can shut down or continue operating at reduced power. If the engine is used for safety-related
tasks, or if this behavior compromises safety, corresponding backup solutions must be implemented by the
OEM or operating company.
Modifications or conversions
Unauthorized changes to the product represent a contravention of its intended use and compromise safety.
Changes or modifications shall only be considered to comply with the intended use when expressly author-
ized by the manufacturer. The manufacturer shall not be held liable for any damage resulting from unauthor-
ized changes or modifications.
MS150100/06E 2017-08
| Safety | 7
TIM-ID: 0000078267 - 001
