3.
Unscrew the oil filter covers (1) approx. 3 to
4 revolutions.
4.
Wait 10 minutes until the oil has drained from
the filter housings.
5.
Remove cover (1) with oil filter element (3)
and remove oil filter element (3) by pressing
on the bottom edge from the side.
6.
Check condition of sealing ring (2) on cover.
7.
Replace sealing ring (2) if damaged.
8.
Coat sealing ring (2) with oil.
9.
Insert new oil filter element (3) in cover (1)
and press in until it locks in place.
10.
Screw on cover (1) with oil filter element (3) and tighten to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Screw cap
-
Tightening torque
35±3.5 Nm
11.
Replace other oil filters in the same way.
12.
Fit cover and tighten screws.
13.
138 | Oil Filtration / Cooling | MS150100/06E 2017-08
TIM-ID: 0000028018 - 003
