5.
Open drain plugs and drain coolant at crank-
case, right side (1, 2).
6.
Open drain plugs and drain coolant at crank-
case, left side (1, 2).
Final steps
1.
Insert drain plug with new sealing ring on engine coolant pump and use torque wrench to tighten to specified
tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M14x1.5
Tightening torque
35+3 Nm
2.
Install drain plugs with new sealing ring in crankcase.
3.
Fit breather valve on filler neck and close it.
142 | Coolant Circuit, General, High-Temperature Circuit | MS150100/06E 2017-08
TIM-ID: 0000031871 - 002
