MSI 3750CS-5 User Manual Download Page 66

Page: 66 / 96

Page 66 MSI-3750CS-5 RF Weighmeter • User Guide

3750CS

ELL

CALE RF DIGITAL WEIGHT INDICATOR

SERIAL OUTPUT “@” COMMANDS

The printer formatting “@” commands and their data conﬁgurations are as follows:

Change to next SC Index (Channel List entry)

Use the @# command to change to the next entry in the SC Index. All subsequent commands which are channel

related will be directed to the new active Channel.

PRINT CURRENT SC INDEX

Use the @? command to cause the output to send the SC Index number of the active analog channel.
Input Data Form:
@?

to query for current list index

Output Data Form:

SC INDEXxx

where xx is the index number from 1-32.
Length: 10

Justiﬁcation: left justiﬁed

PRINT AN “@”

Use the @@ command to cause the output to send an “@” sign. Since this character is normally used for printer

formatting, this is the only way to output the @ sign by itself.

PRINT BLANK SPACES

Use the @B command to cause the output to send a series of spaces. Can be used to position data on a label

without having to enter multiple spaces.
Input Data Form:
@Bxx where xx is any number from 01 to 99 which equals the number of spaces desired. Note: Exactly two digits

must follow the “@B” command.
Output Data Form:
“x” spaces are output limited to 99. For more spaces use two @B commands in series.

Note: For spaces fewer than 5, it is more memory efficient to enter spaces instead of the @B command.

Example - Building on the previous example, we’ll center the “MSI 3750CS” on a 20 column printer:

@B06å4åMSI3750åå5º

The @B06 command printed 6 spaces followed by “MSI 3750” in red expanded characters.

PRINT ID CODE NUMBER

Use the @C command to cause the output to send the current product code number. The number can vary from

0 to 999 depending on the current ID# that the scale is set in. Note that the blank place holder ID# is always 1,

so the lowest alpha entry will be ID#2.
Input Data Form:
@C1

to print the ID Code number plus descriptor

@C2

to print the ID Code number only

Output Data Form:

@C1

I D C O D E # 4

Length:

Justiﬁcation: “ID CODE” left justiﬁed, number right justiﬁed.

@C2

Length:

Justiﬁcation: right

Summary of Contents for 3750CS-5

































































































Search results

Summary of Contents for 3750CS-5

Reviews:

MSI 3750CS-5, User Manual, Page: 66 / 96

Search results

Summary of Contents for 3750CS-5

Reviews: