MSI 3750CS-5 User Manual Download Page 10

Page: 10 / 96

Page 10 MSI-3750CS-5 RF Weighmeter • User Guide

3750CS

ELL

CALE RF DIGITAL WEIGHT INDICATOR

9 dBi Corner Reﬂector

YAGI ANTENNA

A highly directional YAGI Antenna is available by

special order. This antennas offers both high gain

(14dBi) and controllable transmission patterns.

This antenna must be carefully aligned for long

distance applications. The Beamwidth of the Yagi

is 30° Elevation, and 34° Azimuth. The Yagi is mast

mounted for masts up to 2-1/8” (5.4cm) in diameter.

The Yagi is connected to CellScale equipment with

adapter coax P/N 12751 (6’, 1.8m) or P/N 13209

(10’, 3m) Longer lengths available by special order.

Longer lengths must be evaluated by application

due to coax loss. It is usually preferable to run serial

cables longer and keep the Coax short.

CORNER REFLECTOR ANTENNAS

Two Corner Reﬂector Antennas are available by

special order. These antennas offer both high gain

and controllable transmission patterns. These anten-

nas are the best choice when antenna placement

is against a wall or other surface. These antennas

come with a Pipe mount for pipe up to two inches

(5cm) in diameter.

The 14dBi Model (MSI P/N 13204 + 13209 Coax)

features a Beamwidth of 44° Elevation, and 35°

Azimuth.

The 9dBi Model (MSI P/N 13205 + 13209 Coax)

has a Beamwidth of 75° Elevation, and 65° Azi-

muth.

Both Corner reﬂectors must be used with ‘N’ Plug to

‘TNC’ Plug adapter coax P/N 12751 (6’0) or 13209

(10’), longer lengths available by special order).

This is special Low-loss coax suitable for use at

2.5GHz. Do not substitute standard coax varieties.

VEHICLE MOUNT WHIP ANTENNA

14 dBi Yagi

14 dBi Corner Reﬂector

5 dBi Vehicle Whip

A vehicle mount whip antenna is approved for use with MSI CellScale equipment and is avail-

able by special order. This 5 dBi gain whip is rugged and waterproof and mounts in a 3/4” hole

on the roof of mobile vehicles. MSI P/N 13206 (Antenna) and P/N 13207 (mount). The mount

includes 17’ of low loss coax teminated in a TNC Connector.

Summary of Contents for 3750CS-5

































































































Search results

Summary of Contents for 3750CS-5

Reviews:

MSI 3750CS-5, User Manual, Page: 10 / 96

Search results

Summary of Contents for 3750CS-5

Reviews: