MSI 3750CS-5 User Manual Download Page 3

Page: 3 / 96

CellScale

System • 3750CS-5 User Guide Page 3

MEASUREMENT SYSTEMS INTERNATIONAL

Software V2-21 or greater, 2nd Generation Modem

INTRODUCTION

The Measurement Systems International MSI 3750CS RF Weigh Meter is an element of MSI's CellScale

System.

Combined with 1 or more CellScales, the 3750CS provides complete control over all scale and data functions. The

3750CS serves as a remote terminal for any CellScale and has no internal measurement capability. One 3750CS

can read the output of many CellScales, and 1 CellScale can also provide data to many 3750CS'. The large, backlit,

alphanumeric display provides precise, unambiguous indication of operating modes such as Net, Gross, or Total.

The 3750CS can calibrate a CellScale remotely and provides a simple user interface to the advanced features

of the CellScale. Digital calibration makes maintaining the system a snap, and the single board, marine-proof

(NEMA 4) construction makes for a rugged and reliable remote indicator. The 3750CS combined with a CellScale

is designed to meet or exceed the requirements of all regulatory agencies.

3750CS DISPLAY

3750CS FRONT PANEL

Summary of Contents for 3750CS-5

































































































Search results

Summary of Contents for 3750CS-5

Reviews:

MSI 3750CS-5, User Manual, Page: 3 / 96

Search results

Summary of Contents for 3750CS-5

Reviews: