MSI 3750CS-5 User Manual Download Page 22

Page: 22 / 96

Page 22 MSI-3750CS-5 RF Weighmeter • User Guide

3750CS

ELL

CALE RF DIGITAL WEIGHT INDICATOR

To Setup the Tare Key Mode

To Enable Tare Auto Clear

TAREMODE

AUTO

KBD/UPDN

TAREMODE

1) Push SETUP.

2) Push TARE. The TAREMODE submenu is shown.

3) Push ENTER. The ﬁrst menu choice is the current

TARE key mode. In this example, the “AUTO”

mode is enabled. We’ll change the mode to “KBD/

UPDN”.

4) Push the UP key to change the Tare Key mode to

“KBD/UPDN”.

5) Push ENTER. The Scale returns to the SETUP TARE

menu.

6) Push EXIT to return to normal operation with the

TARE key function altered.

TAREMODE

TAREALL

AUTO CLR

DISABLED

ENABLED

AUTO CLR

1) Push SETUP.

2) Push TARE. The TAREMODE submenu is shown.

3) Push the UP scroll key to change the submenu to

“AUTO CLR”.

4) Push ENTER. The ﬁrst selection is the current AUTO

CLR mode.

5) Push the UP key to change the AUTO CLR mode to

“ENABLED”.

6) Push ENTER. The AUTO CLR is now enabled and

the 3750CS is back in the SETUP TARE menu.

7) Push EXIT to return to normal scale operation (with

the AUTO CLEAR TARE function enabled).

Summary of Contents for 3750CS-5

































































































Search results

Summary of Contents for 3750CS-5

Reviews:

MSI 3750CS-5, User Manual, Page: 22 / 96

Search results

Summary of Contents for 3750CS-5

Reviews: