MSI 3750CS-5 User Manual Download Page 37

Page: 37 / 96

CellScale

System • 3750CS-5 User Guide Page 37

MEASUREMENT SYSTEMS INTERNATIONAL

Software V2-21 or greater, 2nd Generation Modem

To Set the Total Mode

The following example assumes the F3 function key is programmed to “TOTAL”. If the TOTAL key has been moved to a different “F” key use that key for the fol-
lowing procedure.

To Turn On or Off Auto Total

∑ MODE

MANUAL

AUTONORM

AUTOPEAK

DISABLED

MANUAL

∑ MODE

1) Push SETUP.

2) Push the TOTAL switch (usually F3).

3) Push ENTER. The ﬁrst menu choice is “MANUAL”

(or the last set mode). In this example, we’ll enable

the “AUTONORM” mode.

4) Push the UP or DOWN key to scroll through the Total

Mode options.

Shown here are all the Total Mode Options to illustrate how the menu structure
works. It is not necessary to go through all options.

5) When the desired choice is displayed, push ENTER.

The ENTER key should be pushed after the LCD

indicates “AUTONORM”.

6) Push the EXIT key to return to normal scale opera-

tion. Auto Total is now enabled. The small “AUTO

∑” annunciator will appear.

Turn on Auto Totaling by pushing the TOTAL key.

The display will read “TOTAL ON” and the small

“AUTO ∑” annunciator will appear.

Turn off Auto Totaling by pushing the TOTAL key.

The display will read “TOTALOFF” and the small

“AUTO ∑” annunciator will disappear.

Return to Auto Total operation.

To Set the Total Threshold

SETUP

∑ MODE

∑ THRESH

PERCENT

∑ THRESH

1) Push SETUP.
2) Push the TOTAL switch (usually F3). The menu

choice “∑ MODE” appears.

3) Push the DOWN key to the menu choice “∑

THRESH”.

4) Push ENTER. The ﬁrst menu choice is “MANUAL”

(or the last set mode). In this example, we’ll enable

the “AUTONORM” mode.

5) Use the numeric keys to input the desired threshold

in per cent. In this example we’ll enter 5%.

6) Set the new Total Threshold by pushing ENTER.
7) Push the EXIT key to return to normal scale opera-

tion. Auto Total is now enabled. The small “AUTO

∑” annunciator will appear.

Summary of Contents for 3750CS-5

































































































Search results

Summary of Contents for 3750CS-5

Reviews:

MSI 3750CS-5, User Manual, Page: 37 / 96

Search results

Summary of Contents for 3750CS-5

Reviews: