MSI 3750CS-5 User Manual Download Page 33

Page: 33 / 96

CellScale

System • 3750CS-5 User Guide Page 33

MEASUREMENT SYSTEMS INTERNATIONAL

Software V2-21 or greater, 2nd Generation Modem

SETUP ID CODES

Allows Front Panel setup of ID Codes features. The 8 character ID Name can be edited, two 20 character print

strings can be assigned to each ID Code, and the Numeric Display mode can be modiﬁed. In addition the display

mode for the desired ID code can be changed to a PER CENT reading or the display can be turned off.

Memory Full

When the CellScales ID Code memory is full this

screen appears if you try to enter a new ID Code.

ID NUMBR

ID NAME

Current ID Name appears

...to select char.

...to scroll char.

...to input char.

...to ﬁnalize edit.

ID NAME

1) Push SETUP.

2) Push the ID # key (whatever Fkey ID# is

assigned to). The message display reads “ID

NUMBR”.

3) Press ENTER. The display reads “ID

NAME”.

4) Push ENTER to go to the edit screen.

5) The message display will show the far left

character blinking. Use the LEFT / RIGHT

Cursor keys to select the character you wish

to edit. Use the UP/DOWN keys or use the

standard Alpha-Numeric entry procedure to

change the letter(s). When ﬁnished editing,

push the ENTER key twice.

See “General Alpha-Numeric Character Entry Procedure”.

6) The display reads “ID NAME”. Press EXIT to

return to normal weighing mode or press UP

or DOWN to reach the next selection.

ID NAME

The name of each ID Code can be changed as desired using the scroll keys, cursor keys, and the Alpha-numeric

keys. This menu item is not used for initial ID Code name entry (see ID CODES). If the name is edited, it may

no longer be in alphabetical order.
To Edit the current ID Code Name

Summary of Contents for 3750CS-5

































































































Search results

Summary of Contents for 3750CS-5

Reviews:

MSI 3750CS-5, User Manual, Page: 33 / 96

Search results

Summary of Contents for 3750CS-5

Reviews: