MR TAPCON, Operating Instructions Manual

Page: 96 / 334

8 Operation
Maschinenfabrik Reinhausen GmbH 2020 96 3587317/21 EN TAPCON
®
Broker address
If you use a URL address, you can use this parameter to enter the domain
name of the MQTT server (broker). Otherwise, you can enter the IP address
of the MQTT server.
Broker port
You can use this parameter to set the port of the MQTT server (broker). The
following ports are used as standard:
▪ 8883 (SSL/TLS)
▪ 1883
Client username (optional)
You can use this parameter to set the client user name for authentication at
the broker. When using authentication, you must configure the broker ac-
cordingly.
Password (optional)
You can use this parameter to set the password for authentication at the bro-
ker. When using authentication, you must configure the broker accordingly.
SSL/TLS encryption
You can use this parameter to set whether the data should be transmitted
over an SSL/TLS-encrypted connection.
Note that an encrypted data transmission does not work if you are using an
SSL proxy.