manualshive.com logo in svg

MR TAPCON, Operating Instructions Manual

Share
Download
MR TAPCON Operating Instructions Manual Download Page 139

8 Operation

Maschinenfabrik Reinhausen GmbH 2020

139

3587317/21 EN

TAPCON

®

8.12.1.1 Desired value 1

1. Go to 

Settings > Parameters > Grid > Control > Desired value

.

2. Enter the desired value.

3. Press the 

Accept

 button to save the modified parameter.

8.12.1.2 Desired value 1...3

You can set 3 different desired values. The device always uses one of the
set desired values for control. You can define the desired value used for
control by means of the "Select desired value" parameter or with the digital
inputs.

The device only processes commands via digital inputs or the control sys-
tem when it is in the Remote mode. You must also set the Remote behavior
[

►

Page 90] parameter accordingly.

Setting the desired value

1. Go to 

Settings > Parameters > Grid > Control > Desired value

.

2. Enter the desired value.

3. Press the 

Accept

 button to save the modified parameter.

Selecting a desired value

You can use this parameter to select the desired value used for control.

1. Go to 

Settings > Parameters > Grid > Control > Select desired value

.

2. Select the desired value from the list.

3. Press the 

Accept

 button to save the modified parameter.

8.12.1.3 Desired value 1...5

You can set 5 different desired values. The device always uses one of the
set desired values for control. You can define the desired value used for
control by means of the "Select desired value" parameter or with the digital
inputs.

The device only processes commands via digital inputs or the control sys-
tem when it is in the Remote mode. You must also set the Remote behavior
[

►

Page 90] parameter accordingly.

Setting the desired value

1. Go to 

Settings > Parameters > Grid > Control > Desired value

.

2. Enter the desired value.

Summary of Contents for TAPCON















































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands