8 Operation
Maschinenfabrik Reinhausen GmbH 2020
88
3587317/21 EN
TAPCON
®
Establishing connection via the rear ETH2.2 interface on the CPU I
module
To connect via the rear interface, proceed as follows:
1. Connect PC and device via rear ETH2.2 interface using Ethernet cable
(RJ45 plug).
Figure 71: Establishing a connection via the rear ETH2.2 interface
2. Go to
Communication
on the device to display the device's IP address.
Figure 72: Displaying the Communication menu item
3. Assign a unique IP address to the PC in the same subnet as the device
(e.g.
192.0.1.100
).
4. Enter the visualization's IP address (e.g.
http://192.0.1.230
, if SSL
encryption is active enter
https://192.0.1.230
) in the browser on the
PC.
ð
The visualization is accessed.
Summary of Contents for TAPCON
Page 1: ...Voltage regulator TAPCON Operating Instructions 3587317 21 EN ...
Page 333: ......
