manualshive.com logo in svg

MR tapcon 240, Operating Instructions Manual

Share
Download
MR tapcon 240 Operating Instructions Manual Download Page 126

7 Functions and settings

Maschinenfabrik Reinhausen 2014

126

222/08 EN

TAPCON® 240

Figure 82: Voltage range

1

Horizontal grid lines (the set
voltage range is between the
horizontal grid lines)

2

Setting box for voltage range
displayed

 

To set the voltage range, proceed as follows:

1.

 > 

 Info > Press 

 until the desired display appears.

ð

Time plotter.

2.

Press 

 until the setting box for the voltage range is highlighted.

ð

The setting box is now highlighted and the value can be changed.

3.

Press 

 to advance one unit or 

 to move back one unit.

ð

The voltage range is set.

Setting retrace time

This function allows you to move the sequence to a precise time in order to
trace how voltage has behaved in the past.

Any time between the present time and the oldest time in the memory can
be set. The time is entered in the following format: 

HH:MM:SS

7.13.5.4

Summary of Contents for tapcon 240















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands