9 Visualization
Maschinenfabrik Reinhausen GmbH 2020
82
4453918/14 EN
ETOS
®
TD
Settings
Parameters
MQTT
Name
Value
Activate MQTT
Off
Broker address
Broker port
8883
Client username
Password
SSL/TLS encryption
Off
Home
Events
Information
Recorder
Settings
EN
CHANGE
REBOOT
admin
23.09.2020 09:23
Figure 61: MQTT
ü
When using a URL on the broker, it may be necessary to enter and acti-
vate [
Page 81] of the DNS server.
ü
If a DNS server is not available, enter the IP address [
Page 79] of the
MQTT server.
1. Go to
Settings > Parameters > System > MQTT
.
2. Select the desired parameter.
3. Set the parameter.
4. Press the
Accept
button to save the modified parameter.
Activate MQTT
You can use this parameter to activate the transmission of messages to the
MQTT server (broker).
Broker address
If you use a URL address, you can use this parameter to enter the domain
name of the MQTT server (broker). Otherwise, you can enter the IP address
of the MQTT server.
Broker port
You can use this parameter to set the port of the MQTT server (broker). The
following ports are used as standard:
▪ 8883 (SSL/TLS)
▪ 1883
Client username (optional)
You can use this parameter to set the client user name for authentication at
the broker. When using authentication, you must configure the broker ac-
cordingly.
Summary of Contents for ETOS TD
