MR ETOS TD, Operating Instructions Manual

Page: 284 / 356

9 Visualization
Maschinenfabrik Reinhausen GmbH 2020 284 4453918/14 EN ETOS
®
TD
If your RADIUS server supports the importing of a dictionary, you can export
the dictionary for ISM® devices from the device and import it onto your RA-
DIUS server. For more information, refer to the information in the section ti-
tled Exporting data [
► Section 9.36.1, Page 287].
The user groups of the dictionary correspond to the user roles [ ► Section
9.34.1, Page 278] of the device and the corresponding authorizations.
9.34.5.2 Configuring RADIUS
To establish a connection to the RADIUS server, you must set the following
parameters.
Settings Parameters RADIUS
Name Value
Activate RADIUS client Off
RADIUS server 0.0.0.0
RADIUS server port 1812
Authentication protocol CHAP
Key (shared secret) default
Home
Events
Information
Recorder
Settings
EN CHANGE REBOOT admin 04.02.2020 11:14
Figure 214: Configuring RADIUS
You can only configure RADIUS if you are assigned an administrator role.
When in delivery status, you can log in as the administrator as follows:
▪ User name:
admin
▪ Password:
admin
1. Go to Settings > Parameters > System > RADIUS .
2. Select the desired parameter.
3. Set the parameter.
4. Press the Accept button to save the modified parameter.
Activate RADIUS client
You can use this parameter to activate the RADIUS client.
RADIUS server
You can use this parameter to set the IP address of the RADIUS server.