21
12 . Loaf Cooking
The cooking programme is limited to 10 to 70 min. only, adjustable in steps
of 10 min., with light medium or dark browning. It can be selected alone and
used:
a) with the Leavened Dough programme,
b) to reheat cooked and cooled breads or to make them crusty,
c) to finish cooking in case of a prolonged electricity cut during a bread
baking cycle.
This programme does not enable you to cook baguettes.
The breadmaker should not be left unattended when using programme 12.
To interrupt the cycle before it is finished, the programme can be stopped
manually by holding down the button
.
13. Bread dough
The Leavened Dough programme does not bake. It is a kneading and rising
programme for all leavened doughs such as pizza dough, rolls, sweet buns.
14. Cake
Can be used to make pastries and cakes with baking powder. Only the 1000 g
weight is available for this programme.
15. Jam
The Jams programme automatically cooks jams and compots (stewed fruits)
in the pan.
16. Pasta Dough
Programme 16 only kneads. It is for unleavened pasta, like noodles for
example.
6. SELECTING THE BREAD WEIGHT
• The bread weight is set by default at 1000 g. This weight is shown for informational purposes.
• Certain recipes cannot be used to make a 750 g loaf.
•
Refer to the recipe details for more information.
•
Programmes 1, 2, 3, 8, 12, 13, 14, 15, 16, do not have weight settings.
• Press the
button to set the chosen product – 750 g, 1000 g or 1500 g. The indicator light against
the selected setting comes on
- FIG.9
.
7. SELECTING THE CRUST COLOUR
• The crust colour is set to medium by default.
• Programmes 8, 13, 15, 16, have no crust colour setting.
Three choices are possible: LIGHT/MEDIUM/DARK.
• If you want to change the default setting, press the
button until the indicator light facing the
desired setting comes on
- FIG.10
.
8. STARTING A PROGRAMME
• To start the selected programme, press the button
- FIG.11
. The programme starts up. The time
corresponding to the programme is displayed. The successive stages take place automatically, one
after the other.
9. USING THE DELAY START PROGRAMME
• You can programme the appliance up to start 15 hours in advance to have your preparation
ready at the time you want.
This function cannot be used on programmes 3, 8, 9, 12, 13, 14, 15, 16.
This step comes after selecting the programme, browning level and weight. The programme time is
displayed. Calculate the time difference between the moment when you start the programme and the
time at which you want your preparation to be ready. The machine automatically includes the duration
of the programme cycles. Using the
and
buttons, display the calculated time (
up and
down). Short presses change the time by intervals of 10 min. + a short beep. Holding the button down
gives continuous scrolling of 10 min. intervals.
For example,
it is 8 pm and you want your bread to be ready for 7 am the next morning.
Programme 11:00 using the
and
buttons. Press the
.
MOULF161-NOTICE_HBB_RELIFT_Mise en page 1 18/01/10 11:49 Page21