FRU Tools and Materials
DEC 2000
1-21
SC
t
300 BTS Hardware Installation, ATP and FRU Procedures
PRELIMINARY
Introduction
The following is a list of the FRUs for the Microcell and Picocell units
and a list of the tools and materials necessary to perform the FRU
installation and removal procedures:
List of FRUs
The following is a list of FRUs for the unit:
1. Site I/O Junction Box with Primary Surge Suppressor – Kit T450AE
2. Site I/O Junction Box without Primary Surge Suppressor – Kit
T450AA
3. RGPS Head – Kit T472AP
4. Short Duration Battery – Kit T348AE
5. Primary Surge Suppressor – Kit T449AA
6. AC Installation Box – Kit T449AB
PicoCell
1. A Band BTS with HSO – Kit SG1476AA
2. A Band BTS without HSO – Kit SG1477AA
3. B Band BTS with HSO – Kit SG1484AA
4. B Band BTS without HSO – Kit SG1485AA
5. Fin Cover – Kit T389AA
MicroCell
1. A Band BTS with HSO – Kit SG1478AA
2. A Band BTS without HSO – Kit SG1479AA
3. B Band BTS with HSO – Kit SG1486AA
4. B Band BTS without HSO – Kit SG1487AA
5. Solar Cover – Kit T451AA
6. Fin Cover – Kit T389AB
Tools and Materials Required
to Perform FRU Procedures
The following is a list of tools and materials required to perform the
FRU installation procedures.
Table 1-5: Tools Required to Perform FRU Procedures
Hand Tools
Materials
Power Tools
T30 Torx tamper bit, 1/4–in. hex
Applicable FRU
None Required
T20 Torx tamper bit, 1/4–in. hex
Installation handles
(
ti
l)
Torque driver wrench, 1/4–in hex
female drive, 0–10 N–M
(optional)
13 mm torque wrench
5/16 breakaway torque wrench
13/16 breakaway torque wrench
1
