Installation Tools and Materials
– continued
DEC 2000
1-13
SC
t
300 BTS Hardware Installation, ATP and FRU Procedures
PRELIMINARY
Tools and Materials for
Installing the Mounting Bracket
on a Pole
The following tools and materials are required to properly and safely
install the the mounting bracket on a pole.
Table 1-1: Tools and Materials for Pole Mounting
Hand Tools
Materials
Power Tools
Safety Glasses
MicroCell or PicoCell
mounting kit
No Power Tools Required
Bucklestrap Cutting Tool (Motorola
part number 6604809N01)
electrical tape
(customer supplied)
T30 TORX tamper bit, 1/4–in. hex
(
pp
)
Torque driver wrench, 1/4–in. hex
female drive, 0–10 N–M
Ball Peen (Metal Working) Hammer
Heavy Gloves
Tape Measure
Tools and Materials for
Installing the Mounting Bracket
on a Rack
The following tools and materials are required to properly and safely
install the mounting bracket on a rack.
Table 1-2: Tools and Materials for Rack Mounting
Hand Tools
Materials
Power Tools
T30 Torx tamper bit, 1/4–in. hex
MicroCell or PicoCell
Mounting Kit
No Power Tools Required
Torque driver wrench, 1/4–in. hex
female drive, 0–10 N–M
Four machine screws 12–24
5/8-in. self tapping (customer
supplied)
Chalk or marker to mark
location on rack
(customer supplied)
electrical tape
(customer supplied)
1
