3 Operating Procedures
3.3.3 Setting the Temperature with SOFTmax PRO
You can turn on the incubator with software by selecting Incubator from the Control
menu. Or, you can click on the Incubator button on the instrument Status bar. The
Incubator dialog window appears.
Incubator Dialog Window
You can leave the temperature setting at the default value or you can type a different
value into the highlighted box.
Note:
The incubator setting is independent of the protocol being run. Running an
experiment does not automatically select the temperature set point. After a reading, the
temperature set point, range, and average actual temperature are recorded in the saved
file.
50
FlexStation II Operator’s Manual – Rev. D
Summary of Contents for FlexStation II
