6.2 Opening a Drawer Manually
6.2 Opening a Drawer Manually
Under some circumstances it may be necessary to open an instrument drawer manually.
1
If the power is not already off (as can occur with a power failure, or if you are already
troubleshooting the instrument with the covers open), turn off the power.
Disconnect
the power cord from the instrument, and the computer cables from the computer.
Warning!
The power must be off for this procedure. If the power is not disconnected,
and a jammed carriage or drawer is suddenly freed, the instrument could suddenly move,
resulting in operator injury.
2
Using your fingernail, or a narrow blade inserted about
⅛
inch, open the drawer door
(to its horizontal position) and pull out the carriage slowly, and as gently as possible.
Caution:
Never force a carriage out of the instrument if it does not come out reasonably
easily. Contact Technical Support.
FlexStation II Operator’s Manual – Rev. D
99
Summary of Contents for FlexStation II
