Mitsubishi ECLIPSE CROSS 2017, Owner'S Manual

Page: 35 / 538

4. Release in sequence the LOCK and UN-
LOCK switches within 10 seconds of
pressing the LOCK switch in step 3.
NOTE
l On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment. Refer to the separate owner’s
manual for details.
Procedure for replacing the
key battery
E00309501764
Before replacing the battery, remove static
electricity from your body by touching a met-
al grounded object.
WARNING
l Danger of explosion if battery is incor-
rectly replaced.
Replace only with the same battery or an
equivalent type.
CAUTION
l
When the key case is opened, be careful to
keep water, dust, etc. out. Also, do not touch
the internal components.
NOTE
l
You may purchase a replacement battery at
an electric appliance store.
l A MITSUBISHI MOTORS Authorized
Service Point can replace the battery for you
if you prefer.
1. Remove the screw (A) from the key.
(Keyless entry key only)
Keyless entry key
2. Remove the emergency key from the
key. (Keyless operation key only)
Refer to “Emergency key” on page
3-16.
3. With the MITSUBISHI mark facing
you, insert the cloth-covered tip of a
straight blade (or minus) screwdriver in-
to the notch in the key case and use it to
open the case.
Keyless entry key
Keyless operation key
NOTE
l Be sure to perform the procedure with the
MITSUBISHI mark facing you. If the
MITSUBISHI mark is not facing you when
you open the key case, the switches may
come out.
Keyless entry system
3-07
OGKE18E1
Locking and unlocking
3