Mitsubishi ECLIPSE CROSS 2017, Owner'S Manual

Page: 140 / 538

Screen Cause Solution (Reference)
l The Forward Collision Mitigation system
(FCM), Lane Departure Warning (LDW)
and Automatic High-Beam (AHB) are
temporarily unavailable due to the high or
low temperature of the sensor. l After the temperature of the sensor has
been in range, the system will automati-
cally return to operation.
Refer to “Forward Collision Mitigation
system (FCM): System problem warn-
ing ” on page 6-84.
Refer to “Lane Departure Warning
(LDW): System problem warning” on
page 6-101.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
l The sensor is temporarily unavailable due
to conditions such as the adhesion of con-
taminants to the sensor or windscreen.
This is not a malfunction. l Refer to “Forward Collision Mitigation
system (FCM): System problem warn-
ing ” on page 6-84.
Refer to “Lane Departure Warning
(LDW): System problem warning” on
page 6-101.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
l There is a fault in the system of the auto-
matic high-beam. l We recommend you to consult a
MITSUBISHI MOTORS Authorized
Service Point.
Refer to “Automatic High-Beam (AHB):
System problem warning” on page 5-60.
l There is a fault in the Auto Stop & Go
(AS&G) system. l Refer to “Auto Stop & Go (AS&G) sys-
tem” on page 6-24.
Indication lamp, warning lamp, and information screen display list
5-40
OGKE18E1
Instruments and controls
5