Mitsubishi ECLIPSE CROSS 2017 Owner'S Manual Download Page 345

Page: 345 / 538

NOTE

Buttons on the product will not operate
while USB device is connected.

USB device specifications and settings may
mean that connection is not possible, or re-
sult in differences in operation or display.

Depending on audio data in the USB device,
track information may not be displayed cor-
rectly.

Depending on the status of the vehicle and
device, the iPod/iPhone may not play back
after starting the engine.

Data containing copyright information may
not play back.

This product can play back MP3, WMA, and
AAC format audio files.

Depending on the type of USB device, usage
may not be possible, or functions that can be
used may be restricted.

The recommended file system for USB
memory is FAT32.

The maximum supported capacity for USB
memory is 32GB.

Operate the USB device containing recorded
audio files while connected to this product.

Play Back of Audio Files on a

USB Device

Press the MEDIA key to set

USB as the source. The selected source is in-
dicated on the display.

Select the Track (File)

Press the

key or

key to select the

track.

This enables selection of the next or previous
track.

Fast Forward or Rewind

Hold down the 3

key or the 4

key.

Fast forward/rewind is possible.

Switching Playback Mode

Repeat playback, random playback, and scan
playback are possible.

Repeat Playback (RPT)

Press the 1RPT key.

Repeat playback of the track currently being
played.

NOTE

Pressing again will cancel.

Selecting a file will cancel this.

Folder Repeat Playback

Hold down the 1RPT key.

Repeat playback of the tracks within the fold-
er currently being played.

NOTE

Pressing again will cancel.

Even if the file is selected, folder repeat
playback will not be cancelled.

Folder

Random

Playback

(RDM)

Press the 2RDM key.

Play tracks in the folder currently being
played in a random order.

NOTE

Pressing again will cancel.

Even if the file is selected, folder random
playback will not be cancelled.

All Folder Random Playback

Hold down the 2RDM key.

Play the tracks in all folders in a random or-
der.

Listening to Audio Files on a USB Device

7-43

OGKE18E1

For pleasant driving

Summary of Contents for ECLIPSE CROSS 2017



























































































































































































































































































































































































































































































































































Search results

Summary of Contents for ECLIPSE CROSS 2017

Reviews:

Related manuals for ECLIPSE CROSS 2017

Brands by name

Popular brands

Mitsubishi ECLIPSE CROSS 2017, Owner'S Manual

Search results

Summary of Contents for ECLIPSE CROSS 2017

Reviews:

Related manuals for ECLIPSE CROSS 2017

Brands by name

Popular brands