Mitsubishi ECLIPSE CROSS 2017, Owner'S Manual

Page: 232 / 538

When you reach your desired speed, release
the switch. Your new cruising speed is now
set.
To slow down your speed in small amounts,
push down the “SET -” switch (B) for less
than approximately 1 second and release it.
Each time you push down the “SET -” switch
(B), your vehicle will slow down by approxi-
mately 1.6 km/h (1 mph).
Brake pedal
While driving at the set speed, use the brake
pedal, which disengages the cruise control,
then push down the “SET -” switch (B) and
release the switch momentarily to set a new
desired cruising speed.
To temporarily increase or de-
crease the speed
E00609601407
To temporarily increase the
speed
Depress the accelerator pedal as you would
normally. When you release the pedal, you
will return to your set speed.
NOTE
l In some driving conditions, the set speed
driving may be deactivated. If this happens,
refer to “To activate” on page 6-56 and re-
peat the speed setting procedure.
To temporarily decrease the
speed
Depress the brake pedal to decrease the
speed. To return to the previously set speed,
push up the “RES +” switch (C).
Cruise control
6-58
OGKE18E1
Starting and driving
6