Mitsubishi ECLIPSE CROSS 2017, Owner'S Manual

Page: 263 / 538

Ultrasonic misacceleration Mitigation System (UMS)*
E00643400378
The Ultrasonic misacceleration Mitigation System (UMS) operates to prevent sudden starts and mitigate collision-caused damages by suppress-
ing the engine output for up to approximately 5 seconds when the system judges that the system is detected the vehicle or obstacles within ap-
proximately 4 m in front and behind your vehicle and judges that accelerator pedal was depressed promptly and too strongly such as misopera-
tion of it. This system operates when the vehicle is at stop or moving forward is backward at less than approximately 10 km/h (6 mph).
When the UMS operates, the warning display appears on the information screen of the multi-information display, and the buzzer sounds intermit-
tently.
UMS ON/OFF is switched in conjunction with the ON/OFF state of the Forward Collision Mitigation system (FCM). (on vehicles equipped with
FCM)
Situation Operation display Buzzer
When an obstacle is detected in front of your vehicle with the
selector lever in the “D” (DRIVE), or in the sport mode, if the
accelerator pedal is depressed promptly and too strongly, the
engine output is suppressed for up to approximately 5 seconds.
Intermittent
beeping sound.
When an obstacle is detected behind your vehicle with the se-
lector lever in the “R” (Reverse) position, if the accelerator
pedal is depressed promptly and too strongly, the engine out-
put is suppressed for up to approximately 5 seconds.
Ultrasonic misacceleration Mitigation System (UMS)*
6-89
OGKE18E1
Starting and driving
6