Mitsubishi ECLIPSE CROSS 2017, Owner'S Manual

Page: 198 / 538

5- Turbine
6- Exhaust gas
Auto Stop & Go (AS&G)
system
E00627401162
The Auto Stop & Go (AS&G) system auto-
matically stops and restarts the engine with-
out operating the ignition switch or engine
switch when the vehicle is stopped, such as at
a traffic light or in a traffic jam, to reduce ex-
haust gases, increase fuel efficiency.
CAUTION
l If the vehicle will be stopped for a long time
or if you will leave the vehicle unattended,
stop the engine.
NOTE
l The accumulated time the engine has been
stopped by the AS&G system is displayed in
the multi-information display. Refer to “Au-
to Stop & Go (AS&G) monitor” on page
5-12.
To turn on/off AS&G
E00627501349
The AS&G system is automatically activated
when the ignition switch is turned to the
“ON” position or the operation mode is put in
ON.
You can deactivate the system by pressing
the “Auto Stop & Go (AS&G) OFF” switch.
Refer to “To deactivate” on page 6-28.
Automatically stopping the en-
gine (on vehicles equipped with
M/T)
1. Stop the vehicle when the indica-
tor display turns on.
2. While depressing the brake pedal, fully
depress the clutch pedal and place the
gearshift lever in the “N” (Neutral) posi-
tion.
3. Release the clutch pedal. The engine will
stop automatically.
Auto Stop & Go (AS&G) system
6-24
OGKE18E1
Starting and driving
6