Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Page: 185 / 602

Rear window wiper and wash-
er
E00507302581
The rear window wiper and washer switch
can be operated with the ignition switch or
the operation mode in ON or ACC.
INT - The wiper operates continu-
ously for several seconds then
operates intermittently at in-
tervals of about every 8 sec-
onds
OFF - Off
- The washer fluid will be
sprayed onto the rear window
when the knob is turned fully
in either direction.
The wipers operate automati-
cally several times while the
washer fluid is being sprayed.
NOTE
l
The rear window wiper will automatically
perform several continuous operations if the
gearshift lever or the selector lever is put in
the “R” position while the windscreen wip-
ers or the rear window wiper is operating.
(automatic operation mode)
After the automatic operation, the rear win-
dow wiper will stop operating if the knob is
in the “OFF” position. If the knob is in the
“INT” position, the rear window wiper will
return to the intermittent operation.
It is possible to set the rear window wiper to
perform the automatic operation only if the
gearshift lever or the selector lever is put in
the “R” position while the rear window wip-
er is operating with the knob in the “INT”
position.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
l
If the knob is in the “OFF” position, turn the
knob to the “INT” position twice quickly to
operate the rear window wiper continuously.
(continuous operation mode)
Turn the knob to the “OFF” position to stop
the rear window wiper continuous operation.
NOTE
l
The interval for intermittent operation can be
adjusted.
For further information, we recommend you
to consult a MITSUBISHI MOTORS Au-
thorized Service Point.
On vehicles equipped with the Smartphone
Link Display Audio or the MITSUBISHI
Multi-Communication System (MMCS),
screen operations can be used to make the
adjustment. Refer to the separate owner’s
manual for details.
Headlamp washer switch*
E00510101586
The headlamp washer can be operated with
the ignition switch or the operation mode in
ON or ACC and the lamp switch at the “ ”
position.
Push the button once and the washer fluid
will be sprayed on to the headlamps.
Wiper and washer switch
5-74
OGFE19E1
Instruments and controls
5