Mitsubishi MOTORS OUTLANDER Owner'S Manual Download Page 365

Page: 365 / 602

Repeat Playback (RPT)

Press the 1RPT key.

Repeat playback of the track currently being

played.

NOTE

Pressing again will cancel.

Selecting a track, ejecting, fast forwarding,

or rewinding will cancel.

Random Playback (RDM)

Press the 2RDM key.

Play the tracks on the disc in a random order.

NOTE

Pressing again will cancel.

Ejecting will cancel this.

Scan Playback (SCAN)

Press the PTY/SCAN key.

Play the first 10 seconds of each of the tracks

on the whole disc in order.

NOTE

Press this button again during playback if

you wish to hear that track, and that track

will play normally.

Listen to MP3s

E00737900034

This explains how to listen to audio files on a

disc.

CAUTION

CD-ROM and CD-R/RW media can only

play back MP3 format audio files.

To Listen to MP3s

Insert the disc.

Insert a disc to automatically start playback.

→ “Insert/Eject Discs” on page 7-23

If a disc is already within the product, press

the MEDIA key to switch to CD as the

source.

NOTE

Depending on the file structure, it may take

some time to read the contents of the disc.

Select the Track (File)

Press the

key or

key to select the

track.

This enables selection of the next or previous

track.

Fast Forward or Rewind

Hold down the 3 key or the 4 key.

Fast forward/rewind is possible.

Switch Playback Mode

Repeat playback, random playback, and scan

playback are possible.

Repeat Playback (RPT)

Press the 1RPT key.

Repeat playback of the track currently being

played.

NOTE

Pressing again will cancel.

Selecting a file, ejecting, fast forwarding, or

rewinding will cancel.

Listen to MP3s

7-30

OGFE19E1

For pleasant driving

Summary of Contents for OUTLANDER



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands