Mitsubishi MOTORS OUTLANDER Owner'S Manual Download Page 271

Page: 271 / 602

CAUTION

•

Do not cover the sensor mounted area

(shaded area as shown in the illustration)

with a sticker, licence plate or anything

such as a grill guard, etc.

*: Triangular projection

•

The sensor front cover should not be

modified or painted.

•

Avoid using different size tyres from

those specified and maintain even tyre

wear.

•

Do not modify the suspension of your ve-

hicle.

CAUTION

When the cover in front of the sensor or the

sensor itself is deformed by an accident,

please do not use the ACC and contact a

MITSUBISHI MOTORS Authorized Serv-

ice Point.

When ACC detects no vehicle

in front within the set distance

E00638100029

Your vehicle runs at a speed to which you set.

Setting is possible to a speed between 40 and

180 km/h (112 mph).

NOTE

If the vehicle speed exceed the set speed on

down slope, the system automatically ap-

plied the brake to maintain the vehicle

speed.

When depressing the brake pedal while auto-

matic brake is applied, the brake pedal is felt

solidly, but it is not abnormal. You can more

depress the pedal and it provides greater

braking force.

Sound is heard while automatic brake, but it

is operated a brake control and not abnor-

mal.

When ACC detects a vehicle in

front within the set distance

E00638000145

The ACC makes control to maintain a fol-

lowing distance (time gap) matched with the

vehicle speed between your vehicle and a ve-

hicle in front while also activating brakes as

necessary.

If the vehicle in front stops, the ACC reacts

to it by stopping your vehicle.

Depress the brake pedal as soon as your vehi-

cle comes to a stop.

Adaptive Cruise Control System (ACC)*

6-82

OGFE19E1

Starting and driving

Summary of Contents for OUTLANDER



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands