Mitsubishi MOTORS OUTLANDER Owner'S Manual Download Page 356

Page: 356 / 602

Item

Details

Supported tag

information

ID3 tag Ver. 1.0, Ver. 1.1,

Ver. 2.2, Ver. 2.3, Ver. 2.4

(ISO-8859-1, UTF-16 (Uni-

code)), Titles, Artist name,

Album name

Maximum

number of

characters

that can be

indicated on

the display

64 characters

What Is WMA?

E00736600021

WMA is the abbreviation of Windows Media

Audio, and this is an audio compression for-

mat from Microsoft. This is a compression

format that has a higher compression ratio

than MP3.

NOTE

Microsoft, Windows Media, and Windows

are registered trademarks of Microsoft Cor-

poration (USA) and in other countries.

CAUTION

WMA supports digital rights management

(DRM). This product cannot play back

WMA files protected using this system.

CAUTION

WMA files different to the standards at right

may not play back correctly, or file/folder

names may not be displayed correctly.

“Pro”, “Lossless”, and “Voice” are not sup-

ported.

Standards for WMA Files That

Can Be Played Back

Specifications for WMA files that can be

played are as shown below.

Item

Details

Specification Windows Media Audio Ver-

sion7.0/8.0/9.0

Sampling fre-

quency [kHz]

32/44.1/48

Bit rate

[kbps]

48 to 320

VBR

(variable bit

rate)

Support

Channel

mode

Stereo/Monaural

File exten-

sion

wma

Supported tag

information

WMA tags

Title name, Artist name, Al-

bum name

Item

Details

Maximum

number of

characters

that can be

indicated on

the display

64 characters

What is AAC?

E00736800023

AAC is the abbreviation of Advanced Audio

Coding, and this is an audio compression

standard used in “MPEG-2” and “MPEG-4”.

This features 1.4x the compression of MP3,

with comparable audio quality.

CAUTION

AAC supports digital rights management

(DRM). This product cannot play back AAC

files protected using this system.

AAC files different to the standards at right

may not play back correctly, or file/folder

names may not be displayed correctly.

Standards for AAC Files That

Can Be Played Back

Specifications for AAC files that can be

played are as shown below.

Audio Files (MP3/WMA/AAC)

7-21

OGFE19E1

For pleasant driving

Summary of Contents for OUTLANDER



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands