Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Page: 280 / 602

NOTE
l
If the ACC is in the ‘ON state’ when the ig-
nition switch or operation mode is set to
“OFF”, the system is set to the ‘OFF state’
when the ignition switch or operation mode
is set to “ON” next time.
To resume the control
E00638300050
After cancelling the ACC control (i.e. placing
the system in the ‘standby state’) by pressing
the “CANCEL” switch or depressing the
brake pedal, you can resume the ACC control
at the originally set speed if you push up the
“RES +” switch.
NOTE
l
The conditions to be met before the ACC
control can be resumed are the same as those
for starting the ACC control.
To change the following dis-
tance setting
E00638400035
Every time you press the following distance
setting switch, the setting changes sequential-
ly through three options “Long”, “Middle”
and “Short”, cycling back to “Long” after
“Short”. The distance setting is reset when
the ignition switch or operation mode is set to
“OFF” or when ACC is set to “OFF,” and is
automatically set to “long” when you set
ACC to “ON” next time.
NOTE
l
The following distance varies as a function
of the speed; the faster is the speed, the lon-
ger becomes the distance.
Following distance setting: “Long”
Following distance setting: “Middle”
Following distance setting: “Short”
To activate cruise control (au-
tomatic speed control)
E00638500124
If you hold the “ACC ON/OFF” switch
pressed with the ignition switch or operation
mode set to “ON” and the ACC in the "OFF"
state, the cruise control is activated. The in-
formation screen of the multi information
display then changes to the cruise control
screen and a buzzer sounds at the same time.
Cruise control is turned off if you set the ig-
nition switch or operation mode to “OFF”.
Adaptive Cruise Control System (ACC)*
6-91
OGFE19E1
Starting and driving
6