background image

H/U

H/U

Panel

Beat-Sonic

14778 Beach Blvd. La Mirada, CA 90638

TEL(714) 994-1085

URL : http://beatsonicusa.com/

E-mail : [email protected]

Panel

   Bolts(

4

Clips

(2)

Clips

(4)

Screws

(2 )

Acc case

AC Vent Panel

OEM Audio Unit

Bolts(

4

Mount all components in locations that will not inhibit safe driving or obstruct motions of various 

components of the vehicle functions. Be cautious not to damage wires, piping, tanks and other 

areas as installed in the vehicle. Avoid wet, dusty or areas of extreme temperatures for installation.

 

Damages resulting to the vehicle of aftermarket audio system as result of inproper installations  or 

careless installation are not covered by any warranty, nor are we responsible for any injuries or 

damages resulting from the installation process. Please observe caution when performing installation.

 

 

Make sure that the original audio head unit and sound systems are in working order.

This kit is not designed to resolve issues that existed before installation.

Lexus IS 300 w/ Premium Sound

Car Model

Model Year

Model Chassis Code

2002-2005

SXE10

GXE10

JCE15W

JCE10W

GXE10W

1.Allow plug and play installation of an aftermarket audio system.

1.Front to rear speaker fader will be disabled.

2.Some aftermarket systems may sound a slight popping noise upon first powering

up the audio system. 

 

*Always disconnect the negative terminal of the vehicle battery before installation.
*Protect all wires that must be located near sharp metal parts of the vehicle. 
*Check after installation that all vital features such as wipers, lights, brake lamps, etc 

  are in working order in addition to the installed systems.

Installation 2DIN - 40mm Width x 25mm Height x 82mm Depth      Weight: 250g Brackets, Dash Pieces and Adapter

OEM Toyota dash panel, SLA-91 adapter, installation manual

Remove the AC vent panel.

Accessory panel is removed

OEM Audio unit is removed。

(4 clips and 2 screws)

Attach the factory carrier main brackets as shown

using 6 screws on each side supplied by the aftermarket

head unit.

(2 clips)

(4 Bolts)

1.

1.

Install the aftermarket head unit to the 

appropriate location as shown 

reusing factory 4 bolts.  

2.

Mount the dash piece included with the kit as shown.

3.

Double check to make sure the new dash piece is connected securely.  

4.

2.

3.

TRC

SNOW

)Button

NO:000003

Additional Notes

The dash panel (included with the kit)

is mounted as shown on the right.

Pay special attention to the

mounting point as circled to the right.

Top View

SLA-91

Installation Manual

Lexus IS300 w/ Premium Sound

Thank you for your purchase of Beat-Sonic Sound Adapter SLA-91.

Please read the following instructions carefully during installation and operation.

 

. 1

Removal of the original head unit

.3

Installation of aftermarket audio head unit

.2

.4

Testing the new audio system.

Check that all components function as well as all electrial functions of the vehicle.

Amplifier Remote Wire

Depending on the 

manufacturer or model of

the aftermarket radio, the

reference and names of the

Amplifier Remote Trigger

Wire may differ. Please refer

to the instructions as 

provided by the respective

audio unit to be installed. 

Features

Precautions 

Precautions for Installation Procedures

Dimensions

Package Contents

Make ALL of the following 

connections for proper operation.

*If the aftermarket radio does not come with an amplifier

  remote wire, connect to the acc power. 

Bracketー

(L)

Bracketー

(R)

Included with the kit

ネジ(

6

TRC

OFF

*If equipped, please installal the appropriate

button as shown.

20 Pin

Connector

20 Pin OEM

Connector

Black/Negative Ground (-)

Front speaker Outputs

Orange/Illumination Dimmer

Blue/Antenna Remote

Yellow/Battery Constant (+)

Red/Ignition Power ACC (+)

Blue/White/Amplifier Remote T)

SLA-91

Aftermarket Head Unit

Reviews: