Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Page: 205 / 602

NOTE
l
It is possible to modify functions as follows:
• The time until the power cuts out can be
changed to approximately 60 minutes.
•
The ACC power auto-cutout function can
be deactivated.
For details, we recommend you to consult
a MITSUBISHI MOTORS Authorized
Service Point.
On vehicles equipped with the Smart-
phone Link Display Audio or the
MITSUBISHI Multi-Communication Sys-
tem (MMCS), screen operations can be
used to make the adjustment.
Refer to the separate owner’s manual for
details.
To remove the key
E00620401613
For vehicles equipped with a M/T, when re-
moving the key, push the key in at the
“ACC” position and keep it depressed until it
is turned to the “LOCK” position and remove
it.
For vehicles equipped with A/T or CVT,
when removing the key, first set the selector
lever to the “P” (Park) position, and push the
key in at the “ACC” position and keep it de-
pressed until it is turned to the “LOCK” posi-
tion, and remove it.
CAUTION
l
Do not remove the ignition key from the ig-
nition switch while driving. The steering
wheel will be locked, causing loss of con-
trol.
l
If the engine is stopped while driving, the
brake servomechanism will cease to function
and braking efficiency will deteriorate. Also,
the power steering system will not function
and it will require greater manual effort to
operate the steering.
l
Do not leave the key in the “ON” position
for a long time when the engine is not run-
ning, doing so will cause the battery to be
discharged.
CAUTION
l
Do not turn the key to the “START” position
while the engine is running. Doing so could
damage the starter motor.
Engine switch*
E00631801499
In order to prevent theft, the engine will not
start unless a preregistered keyless operation
key is used. (Engine immobilizer function)
If you are carrying the keyless operation key,
you can start the engine.
Engine switch*
6-16
OGFE19E1
Starting and driving
6