Mitsubishi MOTORS OUTLANDER Owner'S Manual Download Page 331

Page: 331 / 602

CAUTION

The bird’s eye-view is an simulated view

processed by combining view captured by

“Front-view camera”, “Side-view cameras

(right and left)” and “Rear-view camera”.

Because of this, in the Bird’s eye-view

mode, objects will appear to be farther away

than they actually are. In addition, there are

blind spots in the vicinity of the actual vehi-

cle which are not displayed on the screen.

You may crash your vehicle even if there

seems to be a little distance between your

vehicle and an object, and there may be an

object in the area where there seems to be

nothing. Be sure to check the safety around

the vehicle with your own eyes.

The vehicle icon displayed in the Bird’s eye-

view mode differs from the actual vehicle in

colour and size. Because of this, an object

near the vehicle may appear to be in contact

with the vehicle, and the positional relation-

ship between the vehicle and the object may

differ from the actual one.

The view composition processing regions

are present in the four corners of the Bird’s

eye-view display, mainly at the boundary

sections of views from each camera. Be-

cause of this, in the vicinity of the boundary

sections, the sharpness of the views may de-

crease and an object may disappear and re-

appear on the screen.

NOTE

In the Bird’s eye-view mode, since the views

captured by the four cameras, “Front-view

camera”, “Side-view cameras (right and

left)” and “Rear-view camera” are processed

based on a level flat road surface, an image

may be displayed as follows:

•

An object appears to have fallen down

and looks longer or larger.

•

An object having a height from the road

surface may seem to appear from the joint

of the view composition processing re-

gions.

The brightness of the views from each cam-

era may vary depending on the illuminance

conditions.

An object above the camera is not displayed.

The object displayed in the Front-view mode

or the Rear-view mode may not be displayed

in the Bird’s eye-view mode.

The view in the Bird’s eye-view mode may

be displaced from its true position when the

mounting location and angle of each camera

are changed.

The lines on the road may appear to be dis-

placed or bent at the joint of the views.

Cargo loads

E00609902696

Cargo loads precautions

CAUTION

Do not load cargo or luggage higher than the

top of the seatback. Be sure that your cargo

or luggage cannot move once your vehicle is

moving. Having the driver’s vision blocked,

and your cargo being thrown inside the cabin

if you suddenly have to brake can cause a

serious accident or injury.

Load heavy cargo or luggage in the front of

the vehicle. If the load in the back of the ve-

hicle is too heavy, steering may become un-

stable.

Loading a roof carrier

CAUTION

Use a roof carrier that properly fits your ve-

hicle. Do not load luggage directly onto the

roof.

For installation, refer to the instruction man-

ual accompanying the roof carrier.

Cargo loads

6-142

OGFE19E1

Starting and driving

Summary of Contents for OUTLANDER



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands