Mitsubishi MOTORS OUTLANDER Owner'S Manual Download Page 370

Page: 370 / 602

NOTE

Pressing again will cancel.

Even if the file is selected, folder random

playback will not be cancelled.

All Folder Random Playback

Hold down the 2RDM key.

Play the tracks in all folders in a random or-

der.

NOTE

Pressing again will cancel.

Even if the file is selected, all folder random

playback will not be cancelled.

Scan Playback (SCAN)

Press the PTY/SCAN key.

Play the first 10 seconds of each of the tracks

on the whole USB device in order.

NOTE

Press this button again during playback if

you wish to hear that track, and that track

will play normally.

Folder Scan Playback

Hold down the PTY/SCAN key.

Play the first 10 seconds of the first track in

each folder on the USB device in order.

NOTE

Press this button again during playback if

you wish to hear that track, and that track

will play normally.

Search Tracks

Search folders and files, and select a track.

1. Turn the /SEL key to select the folder.

2. Press the /SEL key.

Files within the selected folder are dis-

played.

3. Turn the /SEL key to select the file.

4. Press the /SEL key.

This plays the selected file (track).

NOTE

While the folder is selected, press the 6

key to cancel track search mode.

If there is no operation for 10 seconds after

selecting the folder, then track search mode

will be cancelled.

Select the folder, and hold down the /SEL

key to start playback from the first track in

that folder.

NOTE

While the file is selected, press the 6

key

to return to the previous operation.

While the file is selected, hold down the 6

key to cancel track search mode.

If there is no operation for five seconds after

selecting the file, that file is played back.

Operations such as selecting a track will

cancel track search mode.

To play iPod/USB memory

device tracks via voice

operation (vehicles with

Bluetooth

2.0 interface)

E00748700029

Desired tracks on the iPod/USB memory de-

vice which is connected to the USB input ter-

minal can be selected and played via voice

operation.

For information concerning the voice recog-

nition function or speaker registration func-

tion, refer to “Bluetooth

2.0 interface” on

page 7-48.

The following explains how to prepare for

voice operation and play the tracks.

To play iPod/USB memory device tracks via voice operation (vehicles with Bluetooth

2.0 interface)

7-35

OGFE19E1

For pleasant driving

Summary of Contents for OUTLANDER



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands