Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Page: 216 / 602

Auto Stop & Go (AS&G) indication lamp
Auto Stop & Go (AS&G) indicator display
[For vehicles with M/T]
1. Stop the vehicle.
2. While depressing the brake pedal, fully
depress the clutch pedal and place the
gearshift lever in the “N” (Neutral) posi-
tion.
5M/T
6M/T
3. Release the clutch pedal. The engine will
stop automatically.
[For vehicles with CVT]
1. Stop the vehicle.
2. Depressing the brake pedal. The engine
will stop automatically.
NOTE
l
When the engine is automatically stopped,
changes will occur in the driving operations.
Pay close attention to the following.
•
The brake booster becomes inoperative
and the pedal effort will increase.
If the vehicle is moving, press down the
brake pedal harder than usual.
•
The electric power steering system (EPS)
becomes inoperative and it will become
harder to turn the steering wheel.
• For vehicles equipped with the brake auto
hold system, it is possible to maintain the
state of the engine stop while the brake
auto hold indication lamp is illuminating
after the engine is stopped automatically
even if the brake pedal is released.
CAUTION
l
When the engine is automatically stopped,
do not attempt to exit the vehicle.
Because the engine restarts automatically
when the driver’s seat belt is unfastened or
the driver’s door is opened, an unexpected
accident might occur when the vehicle starts
moving.
l
Observe the following precautions when the
engine is stopped automatically. Otherwise,
an unexpected accident might occur when
the engine restarts automatically.
Auto Stop & Go (AS&G) system*
6-27
OGFE19E1
Starting and driving
6