Mitsubishi MOTORS OUTLANDER Owner'S Manual Download Page 367

Page: 367 / 602

NOTE

Depending on the generation, model, or soft-

ware version of the iPod/iPhone, playback

on this product may not be possible. (→

page 7-15) Additionally, playback as ex-

plained in this document may not be possi-

ble.

For vehicles with a Bluetooth

2.0 interface,

the types of devices that can be connected

may vary.

For details, access the MITSUBISHI

MOTORS website.

Please read and agree to the “Warning about

Links to the Web Sites of Other Compa-

nies”. The websites mentioned above may

connect you to websites other than the

MITSUBISHI MOTORS website.

http://www.mitsubishi-motors.com/en/prod-

ucts/index.html

Usage of iPod/iPhone hardware with the lat-

est software version is recommended.

Regarding how to connect the iPod/iPhone,

refer to “How to connect an iPod” on page

7-70.

When connecting the iPod/iPhone, use a

commercially available iPod connection ca-

ble.

Set up the device in order that no unsafe ac-

tions, such as plugging in the connection ca-

ble are taken while driving.

When inserting and removing the iPod/

iPhone, for safety’s sake first stop the vehi-

cle.

Depending on the status of the iPod/iPhone,

it may take some time until the device is rec-

ognized, or playback starts.

NOTE

Buttons on the product will not operate

while iPod/iPhone is connected.

iPod/iPhone specifications and settings may

mean that connection is not possible, or re-

sult in differences in operation or display.

Depending on audio data in the iPod/iPhone,

track information may not be displayed cor-

rectly.

Depending on the status of the vehicle and

device, the iPod/iPhone may not play back

after starting the engine.

Data containing copyright information may

not play back.

It is recommended that the iPod/iPhone

equaliser settings be set to flat.

Operate the iPod/iPhone while connected to

this product.

If the iPod/iPhone is connected via Blue-

tooth as a Bluetooth- capable audio device,

then do not connect the iPod/iPhone using

an iPod cable. Connection using both meth-

ods will result in erroneous operation.

If an iPod/iPhone does not operate correctly,

then remove the iPod/iPhone from the prod-

uct, reset, then reconnect.

Play iPod

Press the MEDIA key to set the iPod as the

source.

The selected source is indicated on the dis-

play.

Select the Track (File)

Press the

key or

key to select the

track.

This enables selection of the next or previous

track.

Fast Forward or Rewind

Hold down the 3 key or the 4 key.

Fast forward/rewind is possible.

Switch Playback Mode

Repeat playback and shuffle playback are

possible.

Repeat Playback (RPT)

Press the 1RPT key.

Repeat playback of the track currently being

played.

NOTE

Pressing again will cancel.

Shuffle Playback (RDM)

Press the 2RDM key.

Listen to an iPod

7-32

OGFE19E1

For pleasant driving

Summary of Contents for OUTLANDER



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands