Mitsubishi MOTORS OUTLANDER Owner'S Manual Download Page 372

Page: 372 / 602

3. After the voice guide says “What Album

would you like to play?” say the album

title.

4. If there is only one match, the system

proceeds to step 6.

5. If there are two or more matches, the

voice guide will say “More than one

match was found, would you like to play

<album title>?” If you say “Yes,” the

system proceeds to step 6.

If you say “No,” the next matching al-

bum is uttered by the system.

NOTE

If you say “No” to three or all album titles

uttered by the system, the voice guide will

say “Album not found, please try again” and

the system returns to step 2.

6. After the voice guide says “Playing <al-

bum title>,” the system creates a playlist

index for the album title.

NOTE

If the confirmation function is active, the

voice guide confirms if the album title is

correct. If the album title is correct, say

“Yes”. If not, say “No”. After the voice

guide says “Album not found, please try

again,” the system returns to step 2.

7. The system exits the voice recognition

mode and starts playback.

To search by playlist

E00749100020

1. Say “Play” on the main menu.

NOTE

The Bluetooth

2.0 interface starts recogniz-

ing the connected device.

If the connected device cannot be recognized

or a connection error occurs, the Bluetooth

2.0 interface starts an appropriate voice

guide. Follow the voice guide.

2. After the voice guide says “Would you

like to play by Artist, Album, Playlist or

Genre?,” say “Playlist”.

NOTE

If you say “Playlist <playlist>,” you can skip

step 3.

If the device has no playlist, the voice guide

will say “There are no playlists stored on de-

vice” and the system returns to step 2.

3. After the voice guide says “What Play-

list would you like to play?,” say the

playlist name.

4. If there is only one match, the system

proceeds to step 6.

5. If there are two or more matches, the

voice guide will say “More than one

match was found, would you like to play

<playlist>?” If you say “Yes,” the sys-

tem proceeds to step 6.

If you say “No,” the next matching play-

list name is uttered by the system.

NOTE

If you say “No” to three or all playlist names

uttered by the system, the voice guide will

say “Playlist not found, please try again” and

the system returns to step 2.

6. After the voice guide says “Playing

<playlist>,” the system creates an index

for the playlist.

NOTE

If the confirmation function is active, the

voice guide confirms if the playlist name is

correct. If the playlist name is correct, say

“Yes”. If not, say “No”. After the voice

guide says “Playlist not found, please try

again,” the system returns to step 2. Refer to

“Confirmation function setting” on page

7-51.

7. The system exits the voice recognition

mode and starts playback.

To play iPod/USB memory device tracks via voice operation (vehicles with Bluetooth

2.0 interface)

7-37

OGFE19E1

For pleasant driving

Summary of Contents for OUTLANDER



























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands

Mitsubishi MOTORS OUTLANDER, Owner'S Manual

Search results

Summary of Contents for OUTLANDER

Reviews:

Related manuals for OUTLANDER

Brands by name

Popular brands