A- Connector
B- Slit
C- Vehicle seatback
D- Vehicle seat cushion
E- Lower anchorage
If your child restraint system requires the use
of a tether strap, fasten the tether strap in ac-
cordance with steps 4 through 5.
4. Open the cover from the tether anchorage in-
stallation point by pulling it back with your
hand as illustrated.
5. Latch the top tether strap hook (F) of the
child restraint system to the tether anchorage
bracket (G) and tighten the top tether strap so
that it is securely fastened.
6. Push and pull the child restraint system in all
directions to be sure it is firmly secured.
To remove
Remove the child restraint in accordance with the
instructions provided by the child restraint sys-
tem’s manufacturer.
Installing a child restraint system to a
3-point type seat belt (with emergency
locking mechanism)
E00407100731
Installation:
1. Put a child restraint system on the seat in
which you wish to install it, and remove the
head restraint from the seat. Refer to “Head
2. Fasten the seat belt to secure the child re-
straint system. Make sure you hear a “click”
when you insert the latch plate in the buckle.
3. Remove all slack by using the locking clip.
4. Push and pull the child restraint in all direc-
tions to be sure it is secure.
Seat and seat belts
2-17
OCZE14E3
2
Summary of Contents for LANCER EVOLUTION
